Showing 157–168 of 280 results

STL Radio Link

STL Studio Transmitter Link Equipment

Frequency Range: 170MHz - 2.5GHz

Transmitters, Receivers and Amplifiers to link the Studio to the Radio Station.

STL RADIO LINK UHF

STL RADIO LINK UHF Frequency range 200 to 960MHz – Analog Stereo encoder/decoder – Digital input/output card – RF and

AM Transmitter Solid State 500 watts

AM Transmitter Solid State 500 watts   AM Transmitter Solid State 500 watts Modulation PDM Power Modules connected PLUG-IN 2

Solid State 700 watts AM Transmitter

Solid State 700 watts AM Transmitter PDM Modulation PLUG-IN connected power modules 700 watts Power Module Protection of all its

TRANSMITTER AM COMPACT 1000

1kW AM Transmitter

Output Power 1000 nominal watts Load Impedance 50 Ohms unbalanced Frequency response +/- 0.5 dB between 40 Hz and 10 Khz Harmonic Distortion less than 1.5% at 90% modulation, measured between 40Hz and 10Khz Modulation Capacity Better than 140% at positive peak at 100% of Nominal Power Carrier Amplitude Shift Less than 1% Radiation of Harmonic and Spiral Signals Better than 75 dB below the carrier level Residual Noise Better than 65 dB Frequency Stability +/- 5 Hz or better Audio Input Level + 10 dBm nominal for 100% modulation Supply Voltage 110 VAC / 220 VAC with taps of +/- 5% and 10% 1 phase Power Consumption Typical efficiency of 80% for 100% of rated carrier power Operating Conditions Ambient temperature - 5ºC and 40ºC Relative humidity between 0% and 90%. Altitude between 0 and 3500 meters above sea level Size and Weight 80 Kgr. Height 84cm, Depth 60cm, Width 60cm

AM Transmitter Solid State 1.500 watts

AM Transmitter Solid State 1.500 watts AM Transmitter Solid State 1.500 watts Compact Cabinet Stainless Steel. 100% Solid State MOSFET

UHF B IV-V BROADCAST TV PANEL

The UHF Band IV-V TV panel with 1KW maximum capacity and 7/16″ type connector is a heavy duty panel with stainless steel dipole, hot dipped steel radome and reflector, PTFE insulators and stainless steel hardware. Suitable for high power systems with horizontal or vertical polarisation. Installed on all 4 sides of a tower, they determine omnidirectional radiation patterns, UHF panels can be manufactured for vertical or horizontal polarisation on request.

UHF TV power splitters, band IV-V, freq 470-854MHz

UHF TV power splitters, band IV-V, freq 470-854MHz   They are made of aluminum and externally powder painted. PTFE insulator

UHF TV Unbalanced Power Splitter

UHF TV Unbalanced Power Splitter With PTFE insulator and washers o-ring on connectors and closure caps. Here you can find

VHF BIII TV PANEL

VHF BIII TV PANEL   VHF BII TV Panel, thanks to its robustness is ideal for all weather conditions. These